The Pipeline Shock Prevention People
Pump Start-up surge, Valve closure shock, Pump shutdown back flow bang.
Large vessels for high pressures with matching bladders, diaphragms, gas bags, and bellows, for over a third of a century.
ShockGuard Ltd. offer shock alleviators. | Please phone 44(0) 161-480-9625
We have people not voicemail. | Free Phone UK 08080-567-7423
by Liquid Dynamics International Ltd
Measuring, Recording, and Identifying the pressure signals
PulseDoctor and ShockDoctor DIAGNOSTICS
You have the hardware already? LDi has the tools Certified calibrated signal conditioned transducers. Real time massive paper rate, oscillograph printers. GPIB data stream capture laptops, with FFT analysis. Yes even stethoscopes! Let us identify the heart of the problem, on site.
You have the dimensions, we will generate pipe response characteristics.
Identify and predict the results of valve action.
Find the pipe shake from pump start-up surge. Enable you to design "Water Hammer" out of your system.
PulseView SOFTWARE MODELS
Before you invest in system hardware, LDi will run it for you. A "no witchcraft" easy to read set of oscillographic printouts, show you any system dangers, from frequency and amplitude. Allows you to choose the right pump speed and pipe lengths, before your budget is spent.
ShockView enables us to quickly and accurately run your proposed piping system, in our computers, and tell you what the maximum level of pump start up surge, or shutdown shock will be.
From this first model, which is free to you, we can then determine which of our alleviators is most suited to the needs of your system.
If you wish further models of your system, please contact Dave Charles of Liquid Dynamics International in Europe with at least the following information:
"L" Length, "Di" Internal Diameter, "t" Wall thickness, "bM" Material, (modulus if known)
Flow rate "Q" Kg/Sec. if known, SG, cP viscosity at temp.
Pump manufacturer inertia data:
"S" Seconds Spin-up time (the most important figure.)
Contact Dave Charles
Reading an "LDi" SHOCKVIEW plot:
The start point on the pressure axis is the figure for pressure after pressure drop for the length of your system. Deducting this from mean pressure, gives the Delta P drop for your pipe.
The time difference between one peak and the next gives the wave speed frequency / "acoustic" for your system, be sure to check against the pipe shake frequencies.
The slope, or reduction from one peak to the next tells you whether your system is naturally "dissipative". If the slope is steep, your system will not become a pressure amplifier.
Contact Liquid Dynamics International
In the AMERICAS
In US Toll Free 888-326-7377
Free Fax 888-847-8356
Color Fax 001910-270-0320
Video Conference ISDN Line
910-815-2658, & 2659
Box 506 Hampstead, NC 28443
Your Contact Martin Packer (Patents, Designs, and Tech Support)
In EUROPE & rest of the world
Free Phone 08080-567-7423
Fax Free 0800-174-088
Colour Fax 161-480-9627
International -44 (0) 161-480-9625
Fax -44 (0) 161-480-9627
Box 47 SK40LH
Your Contact D. Bebb C.E.O.
or D. Charles
In association with:
Hydrotrole Ltd. and US Div. PulseGuard Inc. and Ltd.
Fluid Power Hydraulic Accumulators
Hydrotrole "LiquiFlex" one piece open bag & "MagdAcc" pump controller Special Accumulators.
Pulsation Dampers / Dampeners
PulseGuard Inc. "PumpGuard" pressure pulse damper & pump flow fluctuation remover hardware.
Flow Guard Flow Fuses and Breather Bags
Water Hammer and Pipeline Surge / Shock Alleviators
STOP Pump start up surge, Valve closure shock, and Shut down back flow water hammer.
call toll free 1-888-326-7377, UK Europe -- 44(0)161-480-9625
or Contact ShockGuard Shock Alleviators.
Understanding Pipeline Surge / Shock Alleviators
Shock alleviators and shock accumulators do not alleviate shock, nor do surge alleviators and surge accumulators alleviate surge. SurgeGuard, JumboFlex, and Floatolator all work in the same way. They provide a soft place, so that the pump does not have to instantly accelerate all the liquid in the pipe system when it starts. Similarly, they provide a place into which flow can continue, for a time, against increasing resistance, when a a valve has been slammed. In both cases, because time has been increased, peak pressure generation is decreased. In short, they all prevent the peak pressure from being generated.
Shock-Guard.com / ShockGuard.co.uk Shock Alleviators